Fast delivery
Get in as fast as 1 hour
It’s all local
Shop your favorites
Direct chat
Connect with shoppers
About
Details
Cylinder block and rocker arm studs, shock absorber mounts and ring gear bolts.
Permatex® Threadlockers fixture in approximately 20 minutes and are fully cured within 24 hours. Permatex® Surface Prep™ activator reduces fixture time to 5 minutes. Preceding values are for 3/8"-16 steel "as received" nuts and bolts at 72degF (22degC).
Directions
Note: Threadlocker is for use on metal parts and is not to be used on plastics. For Red Threadlocker, cured product must be heated to 500degF (260degC) before parts will separate. 1. Clean and dry parts using Permatex® Surface Prep™ activator.2. Shake threadlocker before each use.3. Remove cap and snip nozzle tip.4. Apply to threaded areas and assemble parts. Refer to Technical Data Sheet for complete information. Store in a well-ventilated place. Keep container tightly closed.
Warnings
Causes skin irritation, causes serious eye irritation, may cause damage to organs through prolonged or repeated exposure. Prevention: Contains dimethyl hydroperoxide. Do not breathe dust/fume/gas/mist/vapors/spray. Wear protective gloves/protective clothing/eye protection/face protection. Wash face, hands and any exposed skin thoroughly after handling. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do/ Continue rinsing. If on skin: Wash with plenty of soap and water. If inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Storage: Store in a well-ventilated place. Keep container tightly closed. Disposal: Dispose of contents/container to an approved waste disposal plant. Keep out of reach of children.
About
Details
Cylinder block and rocker arm studs, shock absorber mounts and ring gear bolts.
Permatex® Threadlockers fixture in approximately 20 minutes and are fully cured within 24 hours. Permatex® Surface Prep™ activator reduces fixture time to 5 minutes. Preceding values are for 3/8"-16 steel "as received" nuts and bolts at 72degF (22degC).
Directions
Note: Threadlocker is for use on metal parts and is not to be used on plastics. For Red Threadlocker, cured product must be heated to 500degF (260degC) before parts will separate. 1. Clean and dry parts using Permatex® Surface Prep™ activator.2. Shake threadlocker before each use.3. Remove cap and snip nozzle tip.4. Apply to threaded areas and assemble parts. Refer to Technical Data Sheet for complete information. Store in a well-ventilated place. Keep container tightly closed.
Warnings
Causes skin irritation, causes serious eye irritation, may cause damage to organs through prolonged or repeated exposure. Prevention: Contains dimethyl hydroperoxide. Do not breathe dust/fume/gas/mist/vapors/spray. Wear protective gloves/protective clothing/eye protection/face protection. Wash face, hands and any exposed skin thoroughly after handling. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do/ Continue rinsing. If on skin: Wash with plenty of soap and water. If inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Storage: Store in a well-ventilated place. Keep container tightly closed. Disposal: Dispose of contents/container to an approved waste disposal plant. Keep out of reach of children.
Common questions
Learn more about how to place an order here.
Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.
Learn more about pickup orders here.
- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.
With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.
Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.
Learn more about Instacart pricing here.
You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:
- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.
Learn more about instructions for specific items or replacements here.
- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders
If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.